// CODE SNIPPET
[BS] 1404.17 Fastening
JUMP TO FULL CODE CHAPTER
Weather boarding and wall coverings shall be securely fastened with aluminum, copper, zinc, zinc-coated or other approved corrosion-resistant fasteners in accordance with the nailing schedule in Table 2304.10.2 or the approved manufacturer's instructions. Shingles and other weather coverings shall be attached with appropriate standard-shingle nails to furring strips securely nailed to studs, or with approved mechanically bonding nails, except where sheathing is of wood not less than 1-inch (25 mm) nominal thickness or of wood structural panels as specified in Table 2308.6.3(3).
Related Code Sections
1404.17 Exterior Walls, Fastening
Weather boarding and wall coverings shall be securely fastened with aluminum, copper, zinc, zinc-coated or other approved corrosion-resistant ...
Building Code 2018 of Illinois > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.17 Fastening
1404.17 Exterior Walls, Fastening
Weather boarding and wall coverings shall be securely fastened with aluminum, copper, zinc, zinc-coated or other approved corrosion-resistant ...
Building Code 2021 of Illinois > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.17 Fastening
1507.16.5 Roof Assemblies and Rooftop Structures, Fasteners
Fasteners for photovoltaic shingles shall be galvanized, stainless steel, aluminum or copper roofing nails, minimum 12-gage [0.105 inch (2.67 mm ...
Building Code 2021 of Illinois > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.16 Photovoltaic Shingles > 1507.16.5 Fasteners
1507.17.5 Roof Assemblies and Rooftop Structures, Fasteners
Fasteners for photovoltaic shingles shall be galvanized, stainless steel, aluminum or copper roofing nails, minimum 12-gage [0.105 inch (2.67 mm ...
Building Code 2018 of Illinois > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.17 Photovoltaic Shingles > 1507.17.5 Fasteners
18.5.12* Installation Requirements for Seismic Protection, Fasteners
The designated angle category for the fastener(s) used in the sway brace installation shall be determined in accordance with Figure 18.5.12.1 ...
Standard for the Installation of Sprinkler Systems 2019 of Illinois > 18 Installation Requirements for Seismic Protection > 18.5* Sway Bracing > 18.5.12* Fasteners