// CODE SNIPPET
R905.2.5 Fasteners
JUMP TO FULL CODE CHAPTER
Fasteners for asphalt shingles shall be galvanized steel, stainless steel, aluminum or copper roofing nails, minimum 12 gage [0.105 inch (3 mm)] shank with a minimum 3/8-inch-diameter (10 mm) head, ASTM F 1667, of a length to penetrate through the roofing materials and a minimum of 3/4 inch (19 mm) into the roof sheathing. Where the roof sheathing is less than 3/4 inch (19 mm) thick, the fasteners shall penetrate through the sheathing. Fasteners shall comply with ASTM F 1667.
Related Code Sections
1404.17 Exterior Walls, Fastening
Weather boarding and wall coverings shall be securely fastened with aluminum, copper, zinc, zinc-coated or other approved corrosion-resistant ...
Georgia State Minimum Standard Building Code > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.17 Fastening
1405.17 Exterior Walls, Fastening
Weather boarding and wall coverings shall be securely fastened with aluminum, copper, zinc, zinc-coated or other approved corrosion-resistant ...
Georgia State Minimum Standard Building Code > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.17 Fastening
1507.17.5 Roof Assemblies and Rooftop Structures, Fasteners
Fasteners for photovoltaic shingles shall be galvanized, stainless steel, aluminum or copper roofing nails, minimum 12-gage [0.105 inch (2.67 mm ...
Georgia State Minimum Standard Building Code > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.17 Photovoltaic Shingles > 1507.17.5 Fasteners
1507.2.6 Roof Assemblies and Rooftop Structures, Fasteners
Fasteners for asphalt shingles shall be galvanized, stainless steel, aluminum or copper roofing nails, minimum 12 gage [0.105 inch (2.67 mm)] shank ...
Georgia State Minimum Standard Building Code > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.2 Asphalt Shingles > 1507.2.6 Fasteners
2508.5.4 Gypsum Board and Plaster, Fasteners
Fasteners used for the attachment of gypsum board to a horizontal diaphragm ceiling shall be as defined in Table 2508.5. Fasteners shall be spaced ...
Georgia State Minimum Standard Building Code > 25 Gypsum Board and Plaster > 2508 Gypsum Construction > 2508.5 Horizontal Gypsum Board Diaphragm Ceilings > 2508.5.4 Fasteners