// CODE SNIPPET
503.5 Fan Location
JUMP TO FULL CODE CHAPTER
Fans exhausting noxious, toxic, hot vapor or grease laden air shall be located as close to the terminus as practicable, at the roof or within a mechanical equipment room, immediately below the roof.
Exception: Where the fan is listed or approved for such an application.
Related Code Sections
503.5 Exhaust Systems, Fan Location
Fans exhausting noxious, toxic, hot vapor or grease laden air shall be located as close to the terminus as practicable, at the roof or within ...
503.5 Exhaust Systems, Fan Location
Fans exhausting noxious, toxic, hot vapor or grease-laden air shall be located as close to the terminus as practicable, at the roof or within ...
502.9.4 Exhaust Systems, Explosives
, assembly or testing of explosives. Only nonferrous fan blades shall be used for fans located within the ductwork and through which hazardous materials ...
NYC Mechanical Code 2008 > 5 Exhaust Systems > 502 Required Systems > 502.9 Hazardous Materials—Requirements for Specific Materials > 502.9.4 Explosives
502.9.4 Exhaust Systems, Explosives
, assembly or testing of explosives. Only nonferrous fan blades shall be used for fans located within the ductwork and through which hazardous materials ...
NYC Mechanical Code 2014 > 5 Exhaust Systems > 502 Required Systems > 502.9 Hazardous Materials—Requirements for Specific Materials > 502.9.4 Explosives
926.2.4 Specific Appliances, Fireplaces and Solid Fuel-Burning Equipment, Fans
All fan equipment located on any roof or floor other than a floor on grade shall be mounted on or from vibration isolators. Fan equipment with motor ...
NYC Mechanical Code 2008 > 9 Specific Appliances, Fireplaces and Solid Fuel-Burning Equipment > 926 Noise Control Requirements > 926.2 Minimum Structure-Borne Noise and Vibration Isolation Requirements > 926.2.4 Fans