// CODE SNIPPET
H108.1 Fail-Safe Device
JUMP TO FULL CODE CHAPTER
Signs that contain moving sections or ornaments shall have fail-safe provisions to prevent the section or ornament from releasing and falling or shifting its center of gravity more than 15 inches (381 mm). The fail-safe device shall be in addition to the mechanism and the mechanism's housing that operate the movable section or ornament. The fail-safe device shall be capable of supporting the full dead weight of the section or ornament when the moving mechanism releases.
Related Code Sections
H108.1 Signs, Fail-Safe Device
or shifting its center of gravity more than 15 inches (381 mm). The fail-safe device shall be in addition to the mechanism and the mechanism's housing ...
418.104.22.168 Special Detailed Requirements Based on Use and Occupancy, Fail-Safe Engineered Systems
Standby power for mechanical ventilation, treatment systems and temperature control systems shall not be required where an approved fail-safe ...
2015 Michigan Building Code > 4 Special Detailed Requirements Based on Use and Occupancy > 414 Hazardous Materials > 414.5 Inside Storage, Dispensing and Use > 414.5.2 Emergency or Standby Power > 422.214.171.124 Fail-Safe Engineered Systems
G2421.5 Fuel Gas, (410.5) Flashback Arrestor Check Valve
Where fuel gas is used with oxygen in any hot work operation, a listed protective device that serves as a combination flashback arrestor and backflow ...
2015 Michigan Residential Code > 24 Fuel Gas > G2421 (410) Flow Controls > G2421.5 (410.5) Flashback Arrestor Check Valve
Section 117 Scope and Administration, Demolition
of being made safe by repairs, to repair and make safe and sanitary or to demolish and remove to the owner's or the owner's authorized agent's option ...