// CODE SNIPPET
2209.1.3 Fabrication and Erection
JUMP TO FULL CODE CHAPTER
1. All materials shall be flat, clean and straight. If straightening or flattening is necessary, it shall be done by a suitable process or method and in a manner that will not injure the material.
2. Profiles used structurally shall conform to the specified dimension. Care shall be taken not to stretch, bend, or otherwise distort parts of the sections unless such forming is an integral part of the design.
3. Components may be cut by slitting, shearing, sawing, or flame cutting. All punched holes and sheared or flame cut edges of material in members subject to calculated stress shall be clean and free from notches and burred edges.
4. Care shall be taken to avoid damage when loading, unloading, and handling members.
Related Code Sections
2209.1.3 Steel, Fabrication and Erection
1. All materials shall be flat, clean and straight. If straightening or flattening is necessary, it shall be done by a suitable process ...
NYC Building Code 2008 > 22 Steel > 2209 Cold-Formed Steel > 2209.1 General > 2209.1.3 Fabrication and Erection
2205.6 Steel, Fabrication, Erection and Quality Control
In addition to the provisions for fabrication, erection and quality control in AISC 360, the following provisions shall be used ...
NYC Building Code 2014 > 22 Steel > 2205 Structural Steel > 2205.6 Fabrication, Erection and Quality Control
2205.6 Steel, Fabrication, Erection and Quality Control
In addition to the provisions for fabrication, erection and quality control in AISC-LRFD and AISC 335, the following provisions shall be used ...
NYC Building Code 2008 > 22 Steel > 2205 Structural Steel > 2205.6 Fabrication, Erection and Quality Control
2205.6.4.2 Steel, Tag Lines
While structural members or assemblies are being hoisted, tag lines shall be used to prevent uncontrolled movement ...
NYC Building Code 2008 > 22 Steel > 2205 Structural Steel > 2205.6 Fabrication, Erection and Quality Control > 2205.6.4 Structural Steel Erection > 2205.6.4.2 Tag Lines
2205.6.4.5 Steel, Permanent Flooring and Steel Erection in Tiered Buildings
The permanent floors of such buildings or other structures shall be installed as soon as possible as the erection of structural steel members ...
NYC Building Code 2008 > 22 Steel > 2205 Structural Steel > 2205.6 Fabrication, Erection and Quality Control > 2205.6.4 Structural Steel Erection > 2205.6.4.5 Permanent Flooring and Steel Erection in Tiered Buildings