// CODE SNIPPET
1715.5.2 Exterior Windows and Door Assemblies Not Provided for in Section 1715.5.1
Jump To Full Code Chapter
Exterior window and door assemblies shall be tested in accordance with ASTM E 330. Structural performance of garage doors shall be determined in accordance with either ASTM E 330 or ANSI/DASMA 108, and shall meet the acceptance criteria of ANSI/DASMA 108. Exterior window and door assemblies containing glass shall comply with Section 2403. The design pressure for testing shall be calculated in accordance with Chapter 16. Each assembly shall be tested for 10 seconds at a load equal to 1.5 times the design pressure.
Related Code Sections
1715.5.2 Structural Tests and Special Inspections, Exterior Windows and Door Assemblies Not Provided for in Section 1715.5.1
Exterior window and door assemblies shall be tested in accordance with ASTM E 330. Structural performance of garage doors shall be determined ...
1709.5.2.1 Special Inspections and Tests, Garage Doors and Rolling Doors
Garage doors and rolling doors shall be tested in accordance with either ASTM E330 or ANSI/DASMA 108, and shall meet the pass/fail criteria of ANSI ...
1709.5.2 Special Inspections and Tests, Exterior Windows and Door Assemblies Not Provided for in Section 1709.5.1
Exterior window and door assemblies shall be tested in accordance with ASTM E330. Structural performance of garage doors and rolling doors shall ...
Section R609 Wall Construction, Exterior Windows and Doors
This section prescribes performance and construction requirements for exterior windows and doors installed in walls. Windows and doors shall ...
1709.5.1 Special Inspections and Tests, Exterior Windows and Doors
Exterior windows and sliding doors shall be tested and labeled as conforming to AAMA/WDMA/CSA101/I.S.2/A440. The label shall state the name ...