// CODE SNIPPET
2110.3.2 Exterior Thin-Unit Panels
JUMP TO FULL CODE CHAPTER
The maximum area of each individual exterior thin-unit panel shall be 85 square feet (7.9 m2). The maximum dimension between structural supports shall be 15 feet (4572 mm) in width or 10 feet (3048 mm) in height. Thin units shall not be used in applications where the design wind pressure exceeds 20 psf (958 N/m2).
Related Code Sections
2110.3.2 Masonry, Exterior Thin-Unit Panels
The maximum area of each individual exterior thin-unit panel shall be 85 square feet (7.9 m 2 ). The maximum dimension between structural supports ...
NYC Building Code 2008 > 21 Masonry > 2110 Glass Unit Masonry > 2110.3 Panel Size > 2110.3.2 Exterior Thin-Unit Panels
1405.12 Exterior Walls, Thin Exterior Structural Glass Veneer
The area of a single section of thin exterior structural glass veneer shall not exceed 10 square feet (0.93 m 2 ) where it is not more than 15 feet ...
NYC Building Code 2014 > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.12 Thin Exterior Structural Glass Veneer
1405.11 Exterior Walls, Glass Veneer
The area of a single section of thin exterior structural glass veneer shall not exceed 10 square feet (0.93 m 2 ) where it is not more than 15 feet ...
NYC Building Code 2008 > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.11 Glass Veneer
2110.3.1 Masonry, Exterior Standard-Unit Panels
The maximum area of each individual exterior standard-unit panel shall be 144 square feet (13.4 m 2 ) when the design wind pressure is 20 psf (958 N ...
NYC Building Code 2008 > 21 Masonry > 2110 Glass Unit Masonry > 2110.3 Panel Size > 2110.3.1 Exterior Standard-Unit Panels
1405.12.3 Exterior Walls, Application
Thin exterior structural glass veneer shall be set only after backing is thoroughly dry and after application of an approved bond coat uniformly over ...
NYC Building Code 2014 > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.12 Thin Exterior Structural Glass Veneer > 1405.12.3 Application