// CODE SNIPPET
3.5.6 Extension Fitting
JUMP TO FULL CODE CHAPTER
A male by female adapter intended to be used with a sprinkler to adjust the final fit where the sprinkler is installed in a finished ceiling or wall.
Related Code Sections
3.5.6 Definitions, Extension Fitting
A male by female adapter intended to be used with a sprinkler to adjust the final fit where the sprinkler is installed in a finished ceiling or wall ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 3 Definitions > 3.5* System Component Definitions > 3.5.6 Extension Fitting
6.4.8 System Components and Hardware, Extension Fitting
Extension fittings shall be permitted to be used with sprinklers K-8.0 or smaller ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 6 System Components and Hardware > 6.4 Fittings > 6.4.8 Extension Fitting
6.4.8.4.1 System Components and Hardware,
Extension fittings longer than 2 in. (50 mm) shall not be permitted unless specifically listed ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 6 System Components and Hardware > 6.4 Fittings > 6.4.8 Extension Fitting > 6.4.8.4 > 6.4.8.4.1
6.4.8.5.1 System Components and Hardware,
Extension fittings 2 in. (50 mm) and less shall not be required to be included in the hydraulic calculations ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 6 System Components and Hardware > 6.4 Fittings > 6.4.8 Extension Fitting > 6.4.8.5 > 6.4.8.5.1
6.4 System Components and Hardware, Fittings
Extension fittings shall be permitted to be used ...
Standard for the Installation of Sprinkler Systems 2016 of New York State > 6 System Components and Hardware > 6.4 Fittings