// CODE SNIPPET
2303.2.6 Exposure to Weather, Damp or Wet Locations
JUMP TO FULL CODE CHAPTER
Where fire-retardant-treated wood is exposed to weather, or damp or wet locations, it shall be identified as "Exterior" to indicate there is no increase in the listed flame spread index as defined in Section 2303.2 when subjected to ASTM D2898.
Related Code Sections
2303.2.6 Wood, Exposure to Weather, Damp or Wet Locations
Where fire-retardant-treated wood is exposed to weather, or damp or wet locations, it shall be identified as "Exterior" to indicate ...
Building Code 2018 of Illinois > 23 Wood > 2303 Minimum Standards and Quality > 2303.2 Fire-Retardant-Treated Wood > 2303.2.6 Exposure to Weather, Damp or Wet Locations
(A) Equipment for General Use, Damp Locations
A receptacle installed outdoors in a location protected from the weather or in other damp locations shall have an enclosure for the receptacle ...
National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps) > 406.9 Receptacles in Damp or Wet Locations > (A) Damp Locations
240.32 Wiring and Protection, Damp or Wet Locations
Enclosures for overcurrent devices in damp or wet locations shall comply with 312.2 ...
National Electrical Code 2017 of Illinois > 2 Wiring and Protection > 240 Overcurrent Protection > 240.32 Damp or Wet Locations
312.2 Wiring Methods and Materials, Damp and Wet Locations
In damp or wet locations, surface-type enclosures within the scope of this article shall be placed or equipped so as to prevent moisture or water ...
National Electrical Code 2017 of Illinois > 3 Wiring Methods and Materials > 312 Cabinets, Cutout Boxes, and Meter Socket Enclosures > 312.2 Damp and Wet Locations
314.15 Wiring Methods and Materials, Damp or Wet Locations
In damp or wet locations, boxes, conduit bodies, outlet box hoods, and fittings shall be placed or equipped so as to prevent moisture from entering ...
National Electrical Code 2017 of Illinois > 3 Wiring Methods and Materials > 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures > 314.15 Damp or Wet Locations