UpCodes logo
Jump To Full Code Chapter
No employee shall be permitted underneath loads handled by lifting or digging equipment. Employees shall be required to stand away from any vehicle being loaded or unloaded to avoid being struck by any spillage or falling materials. Operators may remain in the cabs of vehicles being loaded or unloaded when the vehicles are equipped, in accordance with §1926.601(b)(6), to provide adequate protection for the operator during loading and unloading operations.

Related Code Sections

1926.651(e) Excavations, Exposure to Falling Loads
being loaded or unloaded to avoid being struck by any spillage or falling materials. Operators may remain in the cabs of vehicles being loaded ...
1926.1425 Cranes & Derricks in Construction, Keeping Clear of the Load
Where available, hoisting routes that minimize the exposure of employees to hoisted loads must be used, to the extent consistent with public safety ...
1926.954(b) Electric Power Transmission and Distribution, Fall Protection
at least twice the potential impact load of an employee's fall, or 13.3 kilonewtons (3,000 pounds-force), whichever is greater. Note to paragraph (b ...
1926.1426(d) Cranes & Derricks in Construction, Load Line Free Fall
In each of the following circumstances, controlled load lowering is required and free fall of the load line hoist is prohibited ...
1926.502(d)(4) Fall Protection,
Dee-rings and snaphooks shall be proof-tested to a minimum tensile load of 3,600 pounds (16 kN) without cracking, breaking, or taking permanent ...