// CODE SNIPPET

903.1 Existing Shafts and Vertical Openings

Existing Building Code 2015 of Utah > 9 Alterations - Level 3 > 903 Building Elements and Materials > 903.1 Existing Shafts and Vertical Openings

JUMP TO FULL CODE CHAPTER

Existing stairways that are part of the means of egress shall be enclosed in accordance with Section 803.2.1 from the highest work area floor to, and including, the level of exit discharge and all floors below.

Related Code Sections

903.1 Alterations - Level 3, Existing Shafts and Vertical Openings

Existing stairways that are part of the means of egress shall be enclosed in accordance with Section 803.2.1 from the highest work area floor ...

Existing Building Code 2015 of Utah > 9 Alterations - Level 3 > 903 Building Elements and Materials > 903.1 Existing Shafts and Vertical Openings

1012.7 Change of Occupancy, Enclosure of Vertical Shafts

All openings into existing vertical shaft enclosures shall be protected by fire assemblies having a fire ...

Existing Building Code 2015 of Utah > 10 Change of Occupancy > 1012 Change of Occupancy Classification > 1012.7 Enclosure of Vertical Shafts

712.1.1 Fire and Smoke Protection Features, Shaft Enclosures

Vertical openings contained entirely within a shaft enclosure complying with Section 713 shall be permitted ...

Building Code 2015 of Utah > 7 Fire and Smoke Protection Features > 712 Vertical Openings > 712.1 General > 712.1.1 Shaft Enclosures

408.5 Special Detailed Requirements Based on Use and Occupancy, Protection of Vertical Openings

Any vertical opening shall be protected by a shaft enclosure in accordance with Section 713, or shall be in accordance with Section 408.5.1 ...

Building Code 2015 of Utah > 4 Special Detailed Requirements Based on Use and Occupancy > 408 Group I-3 > 408.5 Protection of Vertical Openings

607.5.5 Duct Systems, Shaft Enclosures

Shaft enclosures that are permitted to be penetrated by ducts and air transfer openings shall be protected with approved fire and smoke dampers ...

Mechanical Code 2015 of Utah > 6 Duct Systems > 607 Duct and Transfer Openings > 607.5 Where Required > 607.5.5 Shaft Enclosures

About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.

Find Your Codes