// CODE SNIPPET
Section P2502 Existing Plumbing Systems
JUMP TO FULL CODE CHAPTER
Where the entire sanitary drainage system of an existing building is replaced, existing building drains under concrete slabs and existing building sewers that will serve the new system shall be internally examined to verify that the piping is sloping in the correct direction, is not broken, is not obstructed and is sized for the drainage load of the new plumbing drainage system to be installed.
Additions, alterations, renovations or repairs to any plumbing system shall conform to that required for a new plumbing system without requiring the existing plumbing system to comply with the requirements of this code. Additions, alterations or repairs shall not cause an existing system to become unsafe, insanitary or overloaded.
Minor additions, alterations, renovations and repairs to existing plumbing systems shall be permitted in the same manner and arrangement as in the existing system, provided that such repairs or replacement are not hazardous and are approved.
Minor additions, alterations, renovations and repairs to existing plumbing systems shall be permitted in the same manner and arrangement as in the existing system, provided that such repairs or replacement are not hazardous and are approved.
Related Code Sections
Section P2502 Plumbing Administration, Existing Plumbing Systems
to that required for a new plumbing system without requiring the existing plumbing system to comply with the requirements of this code. Additions, alterations ...
Residential Code for one- and two-family dwellings of the Texas Industrialized Housing and Buildings Program > 25 Plumbing Administration > P2502 Existing Plumbing Systems
Section 102 Scope and Administration, Applicability
Plumbing systems lawfully in existence at the time ...
Plumbing Code of the Texas Industrialized Housing and Buildings Program > 1 Scope and Administration > 102 Applicability
P2503.1 Plumbing Administration, Inspection Required
New plumbing work and parts of existing systems affected by new work or alterations shall be inspected by the building official to ensure ...
Residential Code for one- and two-family dwellings of the Texas Industrialized Housing and Buildings Program > 25 Plumbing Administration > P2503 Inspection and Tests > P2503.1 Inspection Required
107.4 Scope and Administration, Testing
New plumbing systems and parts of existing systems that have been altered, extended or repaired shall be tested as prescribed herein to disclose ...
Plumbing Code of the Texas Industrialized Housing and Buildings Program > 1 Scope and Administration > 107 Inspections and Testing > 107.4 Testing