// CODE SNIPPET
R313.5.1 Existing Dwellings
Related Code Sections
R313.5.1 Building Planning, Existing Dwellings
Alterations to an existing attic which create a building height of three stories above grade shall be permitted in conformance with Section AJ604.3 ...
2010 Residential Code of NY > 3 Building Planning > R313 Smoke Alarms, Carbon Monoxide Alarms and Automatic Sprinkler Systems > R313.5 Automatic Sprinkler Systems > R313.5.1 Existing Dwellings
220.83 Wiring and Protection, Existing Dwelling Unit
This section shall be permitted to be used to determine if the existing service or feeder is of sufficient capacity to serve additional loads. Where ...
National Electrical Code 2017 of New York State > 2 Wiring and Protection > 220 Branch-Circuit, Feeder, and Service Load Calculations > 220.83 Existing Dwelling Unit
R314.2.2 Building Planning, Smoke Alarms in Existing Dwellings
Existing dwellings undergoing repair, alteration, change of occupancy, addition or relocation shall be provided with smoke alarms as required ...
Residential Code 2015 of New York State > 3 Building Planning > R314 Smoke Alarms > R314.2 Where Required > R314.2.2 Smoke Alarms in Existing Dwellings
AJ601.8.2.1 Existing Buildings and Structures, New or Relocated Fuel-Burning Appliance
When a new fuel-burning appliance is added to, installed in, or attached to an existing dwelling unit, or when an existing fuel-burning appliance ...
2020 Residential Code of New York State > J Existing Buildings and Structures > AJ601 Alterations—Level 2 > AJ601.8 Fire and Life Safety Protection > AJ601.8.2 Carbon Monoxide Alarms > AJ601.8.2.1 New or Relocated Fuel-Burning Appliance