// CODE SNIPPET
A405.3.4 Existing Concrete
JUMP TO FULL CODE CHAPTER
All existing concrete footings shall be permitted to be assumed to be plain concrete with a compressive strength of 2,000 pounds per square inch (13.8 MPa). Existing concrete compressive strength taken greater than 2,000 pounds per square inch (13.8 MPa) shall be verified by testing, record drawings or department records.
Related Code Sections
A405.3.4 Earthquake Risk Reduction in Wood-Frame Residential Buildings With Soft, Weak or Open Front Walls, Existing Concrete
All existing concrete footings shall be permitted to be assumed to be plain concrete with a compressive strength of 2,000 pounds per square inch ...
Existing Building Code 2015 of Idaho > A4 Earthquake Risk Reduction in Wood-Frame Residential Buildings With Soft, Weak or Open Front Walls > A405 Materials of Construction > A405.3 Existing Materials > A405.3.4 Existing Concrete
Chapter A5 Earthquake Hazard Reduction in Existing Concrete Buildings
Existing Building Code 2015 of Idaho > A5 Earthquake Hazard Reduction in Existing Concrete Buildings
Section A502 Earthquake Hazard Reduction in Existing Concrete Buildings, Scope
The provisions of this chapter shall apply to all buildings having concrete floors or roofs supported by reinforced concrete walls or by concrete ...
Existing Building Code 2015 of Idaho > A5 Earthquake Hazard Reduction in Existing Concrete Buildings > A502 Scope
Section A507 Earthquake Hazard Reduction in Existing Concrete Buildings, Tier 3 Analysis Procedure
general assumptions and requirements of Section 10.3 of ASCE 41, excluding those for concrete frames with infills, shall be used in the evaluation ...
Existing Building Code 2015 of Idaho > A5 Earthquake Hazard Reduction in Existing Concrete Buildings > A507 Tier 3 Analysis Procedure