// CODE SNIPPET
804.3.6 Exhauster Connections
Related Code Sections
804.3.6 Chimneys and Vents, Exhauster Connections
An appliance vented by natural draft shall not be connected into a vent, chimney or vent connector on the discharge side of a mechanical flue ...
Mechanical Code 2018 of Maryland > 8 Chimneys and Vents > 804 Direct-Vent, Integral Vent and Mechanical Draft Systems > 804.3 Mechanical Draft Systems > 804.3.6 Exhauster Connections
502.11.2 Exhaust Systems, Projectors Without Exhaust Connection
Projectors without an exhaust connection shall have contaminants exhausted through a mechanical exhaust system. The exhaust rate for electric arc ...
Mechanical Code 2018 of Maryland > 5 Exhaust Systems > 502 Required Systems > 502.11 Motion Picture Projectors > 502.11.2 Projectors Without Exhaust Connection
801.14 Chimneys and Vents, Connections to Exhauster
Appliance connections to a chimney or vent equipped with a power exhauster shall be made on the inlet side of the exhauster. Joints and piping ...
Mechanical Code 2018 of Maryland > 8 Chimneys and Vents > 801 General > 801.14 Connections to Exhauster
506.3.2.3 Exhaust Systems, Duct-To-Exhaust Fan Connections
Duct-to-exhaust fan connections shall be flanged and gasketed at the base of the fan for vertical discharge fans; shall be flanged, gasketed ...
Mechanical Code 2018 of Maryland > 5 Exhaust Systems > 506 Commercial Kitchen Hood Ventilation System Ducts and Exhaust Equipment > 506.3 Ducts Serving Type I Hoods > 506.3.2 Joints, Seams and Penetrations of Grease Ducts > 506.3.2.3 Duct-To-Exhaust Fan Connections
504.8.5 Exhaust Systems, Length Identification
label or tag. The label or tag shall be located within 6 feet (1829 mm) of the exhaust duct connection ...
Mechanical Code 2018 of Maryland > 5 Exhaust Systems > 504 Clothes Dryer Exhaust > 504.8 Domestic Clothes Dryer Ducts > 504.8.5 Length Identification