// CODE SNIPPET
502.1.1 Exhaust Location
JUMP TO FULL CODE CHAPTER
The inlet to an exhaust system shall be located in the area of heaviest concentration of contaminants.
Related Code Sections
502.1.1 Exhaust Systems, Exhaust Location
The inlet to an exhaust system shall be located in the area of heaviest concentration of contaminants ...
Mechanical Code 2018 of Maryland > 5 Exhaust Systems > 502 Required Systems > 502.1 General > 502.1.1 Exhaust Location
1105.6.1.1 Refrigeration, Indoor Exhaust Opening Location
Indoor mechanical exhaust intake openings shall be located where refrigerant leakage is likely to concentrate based on the refrigerant's relative ...
Mechanical Code 2018 of Maryland > 11 Refrigeration > 1105 Machinery Room, General Requirements > 1105.6 Ventilation > 1105.6.1 Discharge Location > 1105.6.1.1 Indoor Exhaust Opening Location
501.3.1 Exhaust Systems, Location of Exhaust Outlets
The termination point of exhaust outlets and ducts discharging to the outdoors shall be located with the following minimum distances: For ducts ...
Mechanical Code 2018 of Maryland > 5 Exhaust Systems > 501 General > 501.3 Exhaust Discharge > 501.3.1 Location of Exhaust Outlets
507.1.5 Exhaust Systems, Exhaust Outlets
Exhaust outlets located within the hood shall be located so as to optimize the capture of particulate matter. Each outlet shall serve not more than ...
Mechanical Code 2018 of Maryland > 5 Exhaust Systems > 507 Commercial Kitchen Hoods > 507.1 General > 507.1.5 Exhaust Outlets
506.5.1.1 Exhaust Systems, Fan Motor
Exhaust fan motors shall be located outside of the exhaust airstream ...
Mechanical Code 2018 of Maryland > 5 Exhaust Systems > 506 Commercial Kitchen Hood Ventilation System Ducts and Exhaust Equipment > 506.5 Exhaust Equipment > 506.5.1 Exhaust Fans > 506.5.1.1 Fan Motor