// CODE SNIPPET
1910.26(b)(2) Exception to Paragraph (B)(1) of This Section
JUMP TO FULL CODE CHAPTER
When the employer demonstrates there is no hazard of transfer vehicles running off the dockboard edge, the employer may use dockboards that do not have run-off protection.
Related Code Sections
1910.26(b)(2) Walking-Working Surfaces, Exception to Paragraph (B)(1) of This Section
When the employer demonstrates there is no hazard of transfer vehicles running off the dockboard edge, the employer may use dockboards that do ...
OSHA 1910 General Industry > D Walking-Working Surfaces > 1910.26 Dockboards > 1910.26(a) > 1910.26(b)(2) Exception to Paragraph (B)(1) of This Section
1910.269(a)(1) Special Industries, Application
: Entire ยง1910.269, except paragraph (r)(1) of this section, applies to line-clearance tree trimming covered ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(a) General > 1910.269(a)(1) Application
1910.94(b)(1) Occupational Health and Environmental Control, Definitions Applicable to This Paragraph
Organic-bonded wheels, the thickness of which is not more than one forty-eighth of their diameter for those up to, and including, 20 inches ...
OSHA 1910 General Industry > G Occupational Health and Environmental Control > 1910.94 Ventilation > 1910.94(b) Grinding, Polishing, and Buffing Operations > 1910.94(b)(1) Definitions Applicable to This Paragraph
1910.110(b)(5) Hazardous Materials, Markings on Containers
Each container covered in paragraph (b)(3)(i) of this section, except as provided in paragraph (b)(3)(iv) of this section shall be marked ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.110 Storage and Handling of Liquefied Petroleum Gases > 1910.110(b) Basic Rules > 1910.110(b)(5) Markings on Containers
1910.333(b)(1) Electrical, Application
This paragraph applies to work on exposed deenergized parts or near enough to them to expose the employee to any electrical hazard they present ...
OSHA 1910 General Industry > S Electrical > 1910.333 Selection and Use of Work Practices > 1910.333(b) Working on or Near Exposed Deenergized Parts > 1910.333(b)(1) Application