// CODE SNIPPET
1704.7.3 Evaluation of In-Place Density
JUMP TO FULL CODE CHAPTER
The special inspector shall determine, at the approved frequency, that the in-place dry density of the compacted fill complies with the approved geotechnical report.
Related Code Sections
1704.7.3 Structural Tests and Special Inspections, Evaluation of In-Place Density
The special inspector shall determine, at the approved frequency, that the in-place dry density of the compacted fill complies with the approved ...
NYC Building Code 2008 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.7 Soils > 1704.7.3 Evaluation of In-Place Density
1704.7.3 Structural Tests and Special Inspections, Evaluation of In-Place Density
The special inspector shall determine, at the approved frequency, that the in-place dry density of the compacted fill complies with the approved ...
NYC Building Code 2014 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.7 Subsurface Conditions > 1704.7.3 Evaluation of In-Place Density
2604.2.1 Plastic, Density
The minimum density of the interior trim shall be 20 pcf (320 kg/m 3 ) ...
NYC Building Code 2008 > 26 Plastic > 2604 Interior Finish and Trim > 2604.2 Foam Plastic Interior Trim > 2604.2.1 Density
2604.2.1 Plastic, Density
The minimum density of the interior trim shall be 20 pcf (320 kg/m 3 ) ...
NYC Building Code 2014 > 26 Plastic > 2604 Interior Finish and Trim > 2604.2 Foam Plastic Interior Trim > 2604.2.1 Density
402.14.5.1 Special Detailed Requirements Based on Use and Occupancy, Density
The minimum density of foam plastics used in signs shall not be less than 20 pounds per cubic foot (pcf) (320 kg/m 3 ) ...
NYC Building Code 2008 > 4 Special Detailed Requirements Based on Use and Occupancy > 402 Covered Mall Buildings > 402.14 Plastic Signs > 402.14.5 Foam Plastics > 402.14.5.1 Density