UpCodes logo
Go To Full Code Chapter
A specific action or project permit is required to erect, install or relocate any appliance, device or system listed in this subsection when such equipment is to be used in connection with hazardous materials, hazardous waste or hazardous plastics.
  1. Atmospheric tank exceeding 60 gallon (227 L) capacity.
  2. Low-pressure tank exceeding 60 gallon (227 L) water capacity.
  3. Pressure vessel exceeding 60 gallon (38 710 mm2) water capacity.
  4. Special vessel.
  5. Spray booth or spray tunnel with any dimension greater than 3 feet.
  6. Dip tank more than 150 gallons capacity or more than 5 square feet of surface area.
  7. Flow coat machine.
  8. Drying oven.
  9. Industrial oven or furnace not otherwise specified.
  10. Industrial proceeding equipment not otherwise specified.
  11. Fumigation chamber.
  12. Automatic fire extinguishing system except automatic sprinkler system.
  13. Compressed or liquefied gas manifold (stationary).
  14. Dust-collecting systems.
  15. Dry cleaning equipment not otherwise specified.
  16. Drilling or redrilling any oil well.
  17. Asbestos abatement.
  18. Gas detection system.

Related Code Sections

304.1.6 General Requirements, Hazard
No person owning or having control of any premises shall allow any hazardous refuse to be present thereon that, by reason of its proximity ...
304.1.6 General Requirements, Hazard
No person owning or having control of any premises shall allow any hazardous refuse to be present thereon which, by reason of its proximity ...