// CODE SNIPPET
503.12.1 Equipment Requiring Draft Hoods
JUMP TO FULL CODE CHAPTER
Vented equipment shall be installed with draft hoods.
Exception: Incinerators, direct-vent equipment, fan-assisted combustion system appliances, equipment requiring chimney draft for operation, equipment equipped with blast, power, or pressure burners that are not listed for use with draft hoods, and equipment designed for forced venting.
Related Code Sections
503.12.1 Chimneys and Vents, Equipment Requiring Draft Hoods
Vented equipment shall be installed with draft hoods. Exception: Incinerators, direct-vent equipment, fan-assisted combustion system ...
NYC Fuel Gas Code 2008 > 5 Chimneys and Vents > 503 Venting of Equipment > 503.12 Draft Hoods and Draft Controls > 503.12.1 Equipment Requiring Draft Hoods
§27-881 Chimneys and Gas Vents, Draft Hoods
equipment shall be installed in accordance with the requirements of the applicable standard in reference standard 15-2. The draft hood shall be located ...
503.12.1 Chimneys and Vents, Appliances Requiring Draft Hoods
appliances, appliances requiring chimney draft for operation, appliances equipped with blast, power, or pressure burners that are not listed for use ...
NYC Fuel Gas Code 2014 > 5 Chimneys and Vents > 503 Venting of Appliances > 503.12 Draft Hoods and Draft Controls > 503.12.1 Appliances Requiring Draft Hoods
503.15 Chimneys and Vents, Obstructions
of appliances not required to be equipped with draft hoods, provided that the appliance manufacturer's instructions cover the installation ...
503.12.2 Chimneys and Vents, Installation
by the appliance manufacturer. Draft hoods shall be equipped with a thermal safety (spill) switch installed in accordance with its listing ...
NYC Fuel Gas Code 2014 > 5 Chimneys and Vents > 503 Venting of Appliances > 503.12 Draft Hoods and Draft Controls > 503.12.2 Installation