// CODE SNIPPET
1606.1 Equipment Information
JUMP TO FULL CODE CHAPTER
- All installations of gas or fuel burners with input above 400,000 Btu/hr and all combination gas or fuel burners must be approved before installation. The following information must be supplied as required by the building official.
- Name, model, and serial number of the burner.
- Input rating and type of fuel.
- Name of the nationally recognized testing laboratory that tested and listed the unit.
- Name, model, and serial number of the furnace or boiler that the burner will be installed in if not part of a complete package.
- A complete wiring diagram showing the factory and fuel wiring installed or to be installed including all controls, identified by the brand name and model number.
- A print of the gas or fuel train from the manual shutoff to the appliance showing all controls that will be installed, their names, model numbers, and approvals.
- All installations of gas or fuel burners with input above 400,000 Btu/hr and all combination gas and oil or other combination fuel burners that are installed in new or renovated boiler or equipment rooms, or are installed in a package with the boiler or furnace, shall include the following information in addition to that required in Item A, subitems 1 to 6.
- A complete piping diagram from the supply source showing all components and materials identified by brand name and model number with relevant approvals.
- Detailed provisions for combustion air, venting, and stacks.
- A floor plan drawn to scale showing all relevant equipment. Plans and specifications shall be approved before proceeding with an installation.
Related Code Sections
1606.1 Installation and Testing of Oil or Liquid Fuel-Fired Equipment, Equipment Information
or renovated boiler or equipment rooms, or are installed in a package with the boiler or furnace, shall include the following information in addition ...
Minnesota Mechanical Code 2015 > 16 Installation and Testing of Oil or Liquid Fuel-Fired Equipment > 1606 > 1606.1 Equipment Information
907.1.2 Fire Protection Systems, Fire Alarm Shop Drawings
Manufacturers' data sheets indicating model numbers and listing information for equipment, devices and materials. Details of ceiling height and construction ...
Minnesota Fire Code 2015 > 9 Fire Protection Systems > 907 Fire Alarm and Detection Systems > 907.1 General > 907.1.2 Fire Alarm Shop Drawings
907.1.2 Fire Protection Systems, Fire Alarm Shop Drawings
Manufacturers' data sheets indicating model numbers and listing information for equipment, devices and materials. Details of ceiling height and construction ...
Minnesota Building Code 2015 > 9 Fire Protection Systems > 907 Fire Alarm and Detection Systems > 907.1 General > 907.1.2 Fire Alarm Shop Drawings
1606.2 Structural Design, Design Dead Load
For purposes of design, the actual weights of materials of construction and fixed service equipment shall be used. In the absence of definite ...
1606.2 Structural Design, Design Dead Load
For purposes of design, the actual weights of materials of construction and fixed service equipment shall be used. In the absence of definite ...