// CODE SNIPPET
1910.307(e) Equipment in Division 2 Locations
JUMP TO FULL CODE CHAPTER
Equipment that has been approved for a Division 1 location may be installed in a Division 2 location of the same class and group. General-purpose equipment or equipment in general-purpose enclosures may be installed in Division 2 locations if the employer can demonstrate that the equipment does not constitute a source of ignition under normal operating conditions.
Related Code Sections
1910.307(e) Electrical, Equipment in Division 2 Locations
Equipment that has been approved for a Division 1 location may be installed in a Division 2 location of the same class and group. General-purpose ...
OSHA 1910 General Industry > S Electrical > 1910.307 Hazardous (Classified) Locations > 1910.307(e) Equipment in Division 2 Locations
1910.106(e)(7)(i)(d) Hazardous Materials,
, Division 1 or Division 2 locations, ordinary electrical equipment including switchgear may be used if installed in a room or enclosure which ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(e) Industrial Plants > 1910.106(e)(7) Electrical > 1910.106(e)(7)(i) Equipment > 1910.106(e)(7)(i)(d)
1910.307(f)(1) Electrical, Explosionproof Apparatus
This protection technique is permitted for equipment in the Class I, Division 1 and 2 locations for which it is approved ...
OSHA 1910 General Industry > S Electrical > 1910.307 Hazardous (Classified) Locations > 1910.307(f) Protection Techniques > 1910.307(f)(1) Explosionproof Apparatus
1910.106(e)(7)(i) Hazardous Materials, Equipment
suitable for Class I, Division 1 or Division 2 locations, ordinary electrical equipment including switchgear may be used if installed in a room ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(e) Industrial Plants > 1910.106(e)(7) Electrical > 1910.106(e)(7)(i) Equipment
1910.307(f)(3) Electrical, Dust-Tight
This protection technique is permitted for equipment in the Class II, Division 2 and Class III locations for which it is approved ...
OSHA 1910 General Industry > S Electrical > 1910.307 Hazardous (Classified) Locations > 1910.307(f) Protection Techniques > 1910.307(f)(3) Dust-Tight