// CODE SNIPPET
(D) Equipment Grounding Conductor Provisions
Related Code Sections
(D) Wiring Methods and Materials, Equipment Grounding Conductor Provisions
A means shall be provided in each metal box for the connection of an equipment grounding conductor. The means shall be permitted to be a tapped hole ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures > 314.40 Metal Boxes, Conduit Bodies, and Fittings > (D) Equipment Grounding Conductor Provisions
(B) Special Equipment, Noninterchangeability
Receptacles and their mating plugs for ungrounded equipment shall not have provision for an equipment grounding conductor and shall ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 668 Electrolytic Cells > 668.21 Power-Supply Circuits and Receptacles for Portable Electrical Equipment > (B) Noninterchangeability
(G) Wiring Methods and Materials, Conductors in Parallel
, equipment grounding conductor, or equipment bonding jumper shall comply with all of the following: Be the same length Consist of the same ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 310 Conductors for General Wiring > 310.10 Uses Permitted > (G) Conductors in Parallel
(2) Special Occupancies, Receptacles and Attachment Plugs
, frequency, rating, and number of conductors with provision for connection of the equipment grounding conductor. This requirement shall apply to 2-pole ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 517 Health Care Facilities > 517.61 Wiring and Equipment > (C) Unclassified Anesthetizing Locations > (2) Receptacles and Attachment Plugs
(B) Equipment for General Use, Grounding
without a connection to an equipment grounding conductor shall be permitted for replacement purposes only. A snap switch wired under the provisions ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 404 Switches > 404.9 General-Use Snap Switches, Dimmers, and Control Switches > (B) Grounding