• Codes
  • Features
  • Pricing
  • Login
  • Sign Up
Sign Up
Login
  • Code Library
  • Features
  • Pricing
  • About
  • Careers
  • Contact
  • Terms
  • Privacy
Sign Up
Upgrade to premium.
Simplify code analysis.


START 2 WEEK FREE TRIAL LEARN ABOUT PREMIUM
// CODE SNIPPET

1926.417(b) Equipment and circuits

OSHA 1926 Construction > K Electrical > 1926.417 Lockout and tagging of circuits > 1926.417(b) Equipment and circuits
JUMP TO FULL CODE CHAPTER
Equipment or circuits that are deenergized shall be rendered inoperative and shall have tags attached at all points where such equipment or circuits can be energized.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.


Copy Section Text

Copy with citation
P Premium Feature

This feature is included in premium subscriptions only. Click below to start a free trial.

Start Free Trial

Related Code Sections


1926.417(b) Electrical, Equipment and circuits
Equipment or circuits that are deenergized shall be rendered inoperative and shall have tags attached at all points where such equipment or circuits ...
OSHA 1926 Construction > K Electrical > 1926.417 Lockout and tagging of circuits > 1926.417(b) Equipment and circuits
1926.404(e)(1)(iii) Electrical, Disconnection of fuses and thermal cutouts
to other than qualified persons and all fuses and thermal cutouts on circuits over 150 volts to ground shall be provided with disconnecting means. This ...
OSHA 1926 Construction > K Electrical > 1926.404 Wiring design and protection > 1926.404(e) Overcurrent protection > 1926.404(e)(1) 600 volts, nominal, or less > 1926.404(e)(1)(iii) Disconnection of fuses and thermal cutouts
1926.1101(g)(5)(i)(B)(2) Toxic and Hazardous Substances,
Electrical circuits in the enclosure shall be deactivated, unless equipped with ground-fault circuit interrupters ...
OSHA 1926 Construction > Z Toxic and Hazardous Substances > 1926.1101 Asbestos > 1926.1101(g) Methods of compliance > 1926.1101(g)(5) Specific control methods for Class I work > 1926.1101(g)(5)(i) > 1926.1101(g)(5)(i)(B) Work Practices > 1926.1101(g)(5)(i)(B)(2)
1926.960(e) Electric Power Transmission and Distribution, Making connections
: In connecting deenergized equipment or lines to an energized circuit by means of a conducting wire or device, an employee shall ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.960 Working on or near exposed energized parts > 1926.960(e) Making connections
1926.800(s)(2) Underground Construction, Caissons, Cofferdams, and Compressed Air,
Lighting circuits shall be located so that movement of personnel or equipment will not damage the circuits or disrupt service ...
OSHA 1926 Construction > S Underground Construction, Caissons, Cofferdams, and Compressed Air > 1926.800 Underground Construction > 1926.800(s) Electrical safety > 1926.800(s)(2)
Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.


LEARN MORE
About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.


Find Your Codes
Contact Us Privacy Terms