// CODE SNIPPET
Related Code Sections
315.5 General Compliance, Equalizers
Equalizers on skimmers shall be prohibited ...
1012.5.2 Change of Occupancy, Height and Area for Change to Equal or Lesser Hazard Category
When a change of occupancy classification is made to an equal or lesser hazard category as shown in Table 1012.5, the height and area ...
2015 Washington State Existing Building Code > 10 Change of Occupancy > 1012 Change of Occupancy Classification > 1012.5 Heights and Areas > 1012.5.2 Height and Area for Change to Equal or Lesser Hazard Category
7188.8.131.52.1 Fire and Smoke Protection Features, Concrete Strength Less Than or Equal to 12,000 PSI
For columns made with concrete having a specified compressive strength, f ' c , of less than or equal to 12,000 psi (82.7 MPa), the minimum ...
2015 Washington State Building Code > 7 Fire and Smoke Protection Features > 722 Calculated Fire Resistance > 722.2 Concrete Assemblies > 722.2.4 Concrete Columns > 7184.108.40.206 Minimum Size > 7220.127.116.11.1 Concrete Strength Less Than or Equal to 12,000 PSI
M1306.1 General Mechanical System Requirements, Appliance Clearance
and in the manufacturer's installation instructions. Note: "A" equals the required clearance with no protection. "B" equals the reduced clearance permitted ...
2015 Washington State Residential Code > 13 General Mechanical System Requirements > M1306 Clearances From Combustible Construction > M1306.1 Appliance Clearance
1405.3.3 Exterior Walls, Material Vapor Retarder Class
the class specified: Class I: Sheet polyethylene, nonperforated aluminum foil with a perm rating of less than or equal to 0.1. Class II: Kraft ...
2015 Washington State Building Code > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.3 Vapor Retarders > 1405.3.3 Material Vapor Retarder Class