// CODE SNIPPET
104.9.3.3 Engineer of Record
JUMP TO FULL CODE CHAPTER
Performance-based designs shall be prepared by, and bear the stamp of, a licensed design professional competent in the area of work. The design professional shall provide written confirmation to the code official before a certificate of occupancy is issued that the performance-based design has been properly implemented, that the operation or use of the building is within the limitations of the design and that adequate controls are in place to maintain compliance with the conditions of the design throughout the life of the building.
Related Code Sections
104.9.3.3 Scope and Administration, Engineer of Record
Performance-based designs shall be prepared by, and bear the stamp of, a licensed design professional competent in the area of work. The design ...
2020 Minnesota State Fire Code > 1 Scope and Administration > 104 General Authority and Responsibilities > 104.9 Alternative Materials, Design and Methods of Construction and Equipment > 104.9.3 Performance-Based Fire and Life Safety Design > 104.9.3.3 Engineer of Record
104.9.3.3 Scope and Administration, Engineer of Record
Performance-based designs shall be prepared by, and bear the stamp of, a licensed design professional competent in the area of work. The design ...
Minnesota Fire Code 2015 > 1 Scope and Administration > 104 General Authority and Responsibilities > 104.9 Alternative Materials and Methods > 104.9.3 Performance-Based Fire and Life Safety Design > 104.9.3.3 Engineer of Record
3904.4 Processing and Extraction Facilities, Site Inspection
Prior to operation of the extraction equipment, where required by the fire code official , the engineer of record or approved professional ...
2020 Minnesota State Fire Code > 39 Processing and Extraction Facilities > 3904 Systems and Equipment > 3904.4 Site Inspection
8.5.3.2.2 General Requirements,
a minimum value of 1.5 times the building story drift, as obtained from either of the following: (a) the structural engineer of record (b) the maximum ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 8 General Requirements > 8.5 Escalator and Moving Walk Seismic Requirements > 8.5.3 Supporting Connections Between the Truss and the Building > 8.5.3.2 > 8.5.3.2.2
1704.2.1 Special Inspections and Tests, Special Inspector Qualifications
specified in other sections of this code. The registered design professional in responsible charge and engineers of record involved in the design ...
Minnesota Building Code 2015 > 17 Special Inspections and Tests > 1704 Special Inspections, Contractor Responsibility and Structural Observations > 1704.2 Special Inspections > 1704.2.1 Special Inspector Qualifications