// CODE SNIPPET
E104.2 Energy Efficiency Information on the Construction Documents
JUMP TO FULL CODE CHAPTER
Construction documents shall be of sufficient clarity to indicate the location, nature and extent of the work proposed, and show in sufficient detail pertinent data and features of the building, systems and equipment as herein governed. Details shall include but are not limited to, as applicable, insulation materials and their R-values; fenestration U-factors and SHGCs; system design criteria; mechanical and service water heating system and equipment types, sizes and efficiencies; economizer description; equipment and system controls; fan motor horsepower (hp) and controls; duct sealing, duct and pipe insulation and location; daylight areas on floor plans; lighting fixture schedule with wattage and control narrative; air sealing details; and COMcheck compliance report or equivalent State of Oregon Building Codes Division form. Plans and specifications shall include requirements for submittal information required by Sections 5.7, 6.7, 7.7, 8.7, and 9.7 of Standard 90.1. The building official shall not require or expect physical copies of record drawings, manuals, test reports, or energy reporting.
Exception: The building official is authorized to waive the requirements for construction documents, COMcheck reports, or other supporting data if the code official determines these are not necessary to confirm compliance with this code.
Construction documents for new buildings shall include the Oregon Zero Energy Ready Compliance Form, including a ZERO Code Calculator report (See ZERO-Code.org/energy-calculator/).
Note: For reference only. Not adopted by the State of Oregon, Building Codes Division, as part of the state building code. The Oregon Department of Energy administers the 1.5% for Green Energy Technology program for public buildings. New construction and major renovation projects for public buildings are required to evaluate and install Green Energy Technology and report to the Oregon Department of Energy in accordance with Oregon Revised Statute (ORS) Chapter 279C, Section 279C.527- 528 and Oregon Administrative Rule (OAR) Chapter 330, Division 135. See Oregon.gov/energy
Related Code Sections
E104.2 Commercial Energy Provisions, Energy Efficiency Information on the Construction Documents
Construction documents shall be of sufficient clarity to indicate the location, nature and extent of the work proposed, and show in sufficient detail ...
2019 Oregon Zero Energy Ready Commercial Code > I Commercial Energy Provisions > E104 Construction Documents > E104.2 Energy Efficiency Information on the Construction Documents
EM104.2 Multi-Family Energy Provisions, Energy Efficiency Information on the Construction Documents
, or energy reporting. Exception: The building official is authorized to waive the requirements for construction documents, COM check reports ...
2019 Oregon Zero Energy Ready Commercial Code > II Multi-Family Energy Provisions > EM104 Submittal Documents > EM104.2 Energy Efficiency Information on the Construction Documents
506.4 Commercial Energy Efficiency, Documentation
generate a report that documents that the proposed design has annual energy costs less than or equal to the annual energy costs of the standard ...
2014 Oregon Energy Efficiency Specialty Code > 5 Commercial Energy Efficiency > 506 Total Building Performance > 506.4 Documentation
405.4 Residential Energy Efficiency, Documentation
information: Address or other identification of the residence; An inspection checklist documenting the building component characteristics ...
2014 Oregon Energy Efficiency Specialty Code > 4 Residential Energy Efficiency > 405 Simulated Performance Alternative (Performance) > 405.4 Documentation