// CODE SNIPPET
1910.147(c)(1) Energy Control Program
JUMP TO FULL CODE CHAPTER
The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative.
Related Code Sections
1910.147(c)(1) General Environmental Controls, Energy Control Program
The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any ...
OSHA 1910 General Industry > J General Environmental Controls > 1910.147 The Control of Hazardous Energy (Lockout/Tagout) > 1910.147(c) General > 1910.147(c)(1) Energy Control Program
1910.269(d)(2)(vii)(E) Special Industries,
Tags may evoke a false sense of security, and their meaning needs to be understood as part of the overall energy control program ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(d) Hazardous Energy Control (Lockout/Tagout) Procedures > 1910.269(d)(2) General > 1910.269(d)(2)(vii) > 1910.269(d)(2)(vii)(E)
1910.147(f)(2) General Environmental Controls,
of the outside employer's energy control program ...
OSHA 1910 General Industry > J General Environmental Controls > 1910.147 The Control of Hazardous Energy (Lockout/Tagout) > 1910.147(f) Additional Requirements > 1910.147(f)(2)
1910.269(d)(2)(vi) Special Industries,
The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees ...
OSHA 1910 General Industry > R Special Industries > 1910.269 Electric Power Generation, Transmission, and Distribution > 1910.269(d) Hazardous Energy Control (Lockout/Tagout) Procedures > 1910.269(d)(2) General > 1910.269(d)(2)(vi)
1910.147(c)(7)(i) General Environmental Controls,
The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees ...
OSHA 1910 General Industry > J General Environmental Controls > 1910.147 The Control of Hazardous Energy (Lockout/Tagout) > 1910.147(c) General > 1910.147(c)(7) Training and Communication > 1910.147(c)(7)(i)