// CODE SNIPPET
2303.1.1.2 End-Jointed Lumber
JUMP TO FULL CODE CHAPTER
Approved end-jointed lumber is permitted to be used interchangeably with solid-sawn members of the same species and grade. End-jointed lumber used in an assembly required to have a fire-resistance rating shall have the designation "Heat Resistant Adhesive" or "HRA" included in its grade mark.
Related Code Sections
2303.1.1.2 Wood, End-Jointed Lumber
Approved end-jointed lumber is permitted to be used interchangeably with solid-sawn members of the same species and grade. End-jointed lumber used ...
Building Code 2018 of Illinois > 23 Wood > 2303 Minimum Standards and Quality > 2303.1 General > 2303.1.1 Sawn Lumber > 2303.1.1.2 End-Jointed Lumber
2308.7.11 Wood, Joints
Joints in lumber sheathing shall occur over supports unless approved end-matched lumber is used, in which case each piece shall bear on not fewer ...
Building Code 2018 of Illinois > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.7 Roof and Ceiling Framing > 2308.7.11 Joints
2304.9 Wood, Lumber Decking
Each piece of lumber decking shall be square-end trimmed ...
Building Code 2018 of Illinois > 23 Wood > 2304 General Construction Requirements > 2304.9 Lumber Decking
2304.9.2.3 Wood, Combination Simple and Two-Span Continuous Pattern
Courses in end spans shall be alternating simple-span pattern and two-span continuous pattern. End joints shall be staggered in adjacent courses ...
Building Code 2018 of Illinois > 23 Wood > 2304 General Construction Requirements > 2304.9 Lumber Decking > 2304.9.2 Layup Patterns > 2304.9.2.3 Combination Simple and Two-Span Continuous Pattern
2304.9.3.3 Wood, Controlled Random Pattern
There shall be a minimum distance of 24 inches (610 mm) between end joints in adjacent courses. The pieces in the first and second courses shall bear ...
Building Code 2018 of Illinois > 23 Wood > 2304 General Construction Requirements > 2304.9 Lumber Decking > 2304.9.3 Mechanically Laminated Decking > 2304.9.3.3 Controlled Random Pattern