// CODE SNIPPET
1910.184(f)(4) End Attachments
JUMP TO FULL CODE CHAPTER
Welding of end attachments, except covers to thimbles, shall be performed prior to the assembly of the sling.
All welded end attachments shall not be used unless proof tested by the manufacturer or equivalent entity at twice their rated capacity prior to initial use. The employer shall retain a certificate of the proof test, and make it available for examination.
Related Code Sections
1910.184(f)(4) Materials Handling and Storage, End Attachments
Welding of end attachments, except covers to thimbles, shall be performed prior to the assembly of the sling ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.184 Slings > 1910.184(f) Wire-Rope Slings > 1910.184(f)(4) End Attachments
1910.66(g)(5)(iv)(E) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms,
A broken wire within 18 inches (460.8 mm) of the end attachments; ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.66 Powered Platforms for Building Maintenance > 1910.66(g) > 1910.66(g)(5) Suspension Wire Rope Maintenance, Inspection and Replacement > 1910.66(g)(5)(iv) > 1910.66(g)(5)(iv)(E)
1910.184(f)(5) Materials Handling and Storage, Removal From Service
Evidence of heat damage. End ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.184 Slings > 1910.184(f) Wire-Rope Slings > 1910.184(f)(5) Removal From Service
1910.184(f) Materials Handling and Storage, Wire-Rope Slings
All welded end attachments shall not be used unless proof tested by the manufacturer or equivalent entity ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.184 Slings > 1910.184(f) Wire-Rope Slings
1910.178(a)(5) Materials Handling and Storage,
If the truck is equipped with front-end attachments other than factory installed attachments, the user shall request that the truck be marked ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.178 Powered Industrial Trucks > 1910.178(a) General Requirements > 1910.178(a)(5)