// CODE SNIPPET
(G) Enclosures in Concrete or Masonry
JUMP TO FULL CODE CHAPTER
An enclosure supported by embedment shall be identified as suitably protected from corrosion and securely embedded in concrete or masonry.
Related Code Sections
(G) Wiring Methods and Materials, Enclosures in Concrete or Masonry
An enclosure supported by embedment shall be identified as suitably protected from corrosion and securely embedded in concrete or masonry ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures > 314.23 Supports > (G) Enclosures in Concrete or Masonry
312.2 Wiring Methods and Materials, Damp and Wet Locations
be permitted to be installed without the airspace on a concrete, masonry, tile, or similar surface. Informational Note: For protection against ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 312 Cabinets, Cutout Boxes, and Meter Socket Enclosures > 312.2 Damp and Wet Locations
(B) Wiring and Protection, Aluminum and Copper-Clad Aluminum Conductors
in direct contact with concrete, masonry, or the earth. Terminations made within outdoor enclosures that are listed and identified for the environment ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.120 Equipment Grounding Conductor Installation > (B) Aluminum and Copper-Clad Aluminum Conductors
403.2.3.3 Special Detailed Requirements Based on Use and Occupancy, Concrete and Masonry Walls
Concrete or masonry walls shall be deemed to satisfy the requirements of Sections 403.2.3.1.and 403.2.3.2 ...
Minnesota Building Code 2015 > 4 Special Detailed Requirements Based on Use and Occupancy > 403 High-Rise Buildings > 403.2 Construction > 403.2.3 Structural Integrity of Interior Exit Stairways and Elevator Hoistway Enclosures > 403.2.3.3 Concrete and Masonry Walls
403.2.3.3 Special Detailed Requirements Based on Occupancy and Use, Concrete and Masonry Walls
Concrete or masonry walls shall be deemed to satisfy the requirements of Sections 403.2.3.1 and 403.2.3.2 ...
2020 Minnesota Building Code > 4 Special Detailed Requirements Based on Occupancy and Use > 403 High-Rise Buildings > 403.2 Construction > 403.2.3 Structural Integrity of Interior Exit Stairways and Elevator Hoistway Enclosures > 403.2.3.3 Concrete and Masonry Walls