// CODE SNIPPET

713.12 Enclosure at Top

Building Code 2015 of Utah > 7 Fire and Smoke Protection Features > 713 Shaft Enclosures > 713.12 Enclosure at Top

JUMP TO FULL CODE CHAPTER

A shaft enclosure that does not extend to the underside of the roof sheathing, deck or slab of the building shall be enclosed at the top with construction of the same fire-resistance rating as the topmost floor penetrated by the shaft, but not less than the fire-resistance rating required for the shaft enclosure.

Related Code Sections

713.12 Fire and Smoke Protection Features, Enclosure at Top

A shaft enclosure that does not extend to the underside of the roof sheathing, deck or slab of the building shall be enclosed at the top ...

Building Code 2015 of Utah > 7 Fire and Smoke Protection Features > 713 Shaft Enclosures > 713.12 Enclosure at Top

1910.252(c)(3)(ii) Welding, Cutting, and Brazing, Fixed enclosure

A fixed enclosure with a top and not less than two sides which surround the welding or cutting operations and with a rate of airflow sufficient ...

OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General requirements > 1910.252(c) Health protection and ventilation > 1910.252(c)(3) Local exhaust hoods and booths > 1910.252(c)(3)(ii) Fixed enclosure

707.5 Fire and Smoke Protection Features, Continuity

to terminate at a top enclosure complying with Section 713.12. 2. Interior exit stairway and ramp enclosures required by Section 1023 and exit ...

Building Code 2015 of Utah > 7 Fire and Smoke Protection Features > 707 Fire Barriers > 707.5 Continuity

1910.106(g)(1)(ii) Hazardous Materials, Special enclosures

The enclosure shall be substantially liquid and vaportight without backfill. Sides, top, and bottom of the enclosure shall ...

OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable liquids > 1910.106(g) Service stations > 1910.106(g)(1) Storage and handling > 1910.106(g)(1)(ii) Special enclosures

1910.261(f)(2)(i) Special Industries,

enclosure shall extend over the top of the feed rolls. It shall be constructed either of solid material or with mesh or openings not exceeding one-half ...

OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, paper, and paperboard mills > 1910.261(f) Rag and old paper preparation > 1910.261(f)(2) Shredders, cutters, and dusters > 1910.261(f)(2)(i)

About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.

Find Your Codes