// CODE SNIPPET
§27-529 Enclosure and Interior Finish
JUMP TO FULL CODE CHAPTER
Places of assembly shall be separated from adjoining occupancies by construction meeting the requirements of table 5-1 or table 5-2, whichever may apply. The interior finish of places of assembly shall meet the requirements of table 5-4.
Related Code Sections
§27-529 Places of Assembly, Enclosure and Interior Finish
apply. The interior finish of places of assembly shall meet the requirements of table 5-4 ...
NYC 1968 Code (Vol I) > 8 Places of Assembly > 2 Basic Requirements > §27-529 Enclosure and Interior Finish
803.1 Interior Finishes, General
enclosures of buildings less than three stories above grade plane of other than Group I-3, Class B interior finish for nonsprinklered buildings and Class C ...
803.11 Interior Finishes, Interior Finish Requirements Based on Group
Interior wall and ceiling finish shall have a flame spread index and smoke-developed index not greater than that specified in Table 803.11 ...
NYC Building Code 2022 > 8 Interior Finishes > 803 Wall and Ceiling Finishes > 803.11 Interior Finish Requirements Based on Group
717.5 Fire and Smoke Protection Features, Combustible Materials in Concealed Spaces in Type I or II Construction
Class A interior finish materials classified in accordance with Section 803. Combustible piping within partitions or shaft enclosures installed ...
NYC Building Code 2014 > 7 Fire and Smoke Protection Features > 717 Concealed Spaces > 717.5 Combustible Materials in Concealed Spaces in Type I or II Construction
2612.3 Plastic, Interior Finish
Fiber reinforced polymer or fiberglass reinforced polymer used as interior finish shall comply with Chapter 8 ...
NYC Building Code 2014 > 26 Plastic > 2612 Fiber Reinforced Polymer and Fiberglass Reinforced Polymer > 2612.3 Interior Finish