// CODE SNIPPET
3404.2.11.7 Emergency Tank and Piping System Test
JUMP TO FULL CODE CHAPTER
The commissioner may require a tank and piping system to be precision tested, pressure tested or tested by other approved method in accordance with this section to determine the condition of the tank or piping or when the commissioner has good cause to believe that a leak exists. Storage systems that may contain flammable or combustible liquid vapor shall not be tested pneumatically. Such tests shall be conducted at the owner's risk by his or her representative.
Related Code Sections
Section 1308 Fuel-Oil Piping and Storage, Testing
piping, and all tanks complying with the alternate tank design and construction standards contained in Section 1305.14, shall be hydrostatically tested ...
Section 1308 Fuel-Oil Piping and Storage, Testing
piping, and all tanks complying with the alternate tank design and construction standards contained in Section 1305.14, shall be hydrostatically tested ...
1305.8 Fuel-Oil Piping and Storage, Emergency Relief Vent Piping
floor, the combination normal and emergency vent piping shall be piped, in an approved manner, into the vent or top of tank of the lowest floor storage ...
NYC Mechanical Code 2014 > 13 Fuel-Oil Piping and Storage > 1305 Fuel-Oil System Installation > 1305.8 Emergency Relief Vent Piping
1305.8 Fuel-Oil Piping and Storage, Emergency Relief Vent Piping
be provided with emergency relief venting. A tank's emergency relief vent piping and normal vent piping shall be combined. The design and installation ...
NYC Mechanical Code 2008 > 13 Fuel-Oil Piping and Storage > 1305 Fuel-Oil System Installation > 1305.8 Emergency Relief Vent Piping
1101.5.1 Storm Drainage, Detention Systems
Where a detention system is provided, the pipe leaving the detention tank shall be permitted to be reduced to the flow allowed by the Department ...
NYC Plumbing Code 2014 > 11 Storm Drainage > 1101 General > 1101.5 Change in Size > 1101.5.1 Detention Systems