// CODE SNIPPET
E4208.4 Emergency Switch for Spas and Hot Tubs
JUMP TO FULL CODE CHAPTER
A clearly labeled emergency shutoff or control switch for the
purpose of stopping the motor(s) that provides power to the
recirculation system and jet system shall be installed at a
point that is readily accessible to the users, adjacent to and
within sight of the spa or hot tub and not less than 5 feet
(1524 mm) away from the spa or hot tub. This requirement
shall not apply to single-family dwellings. (680.41)
Related Code Sections
E4208.4 Swimming Pools, Emergency Switch for Spas and Hot Tubs
and jet system shall be installed at a
point that is readily accessible to the users, adjacent to and
within sight of the spa or hot tub and not less than 5 ...
2015 Michigan Residential Code > 42 Swimming Pools > E4208 Spas and Hot Tubs > E4208.4 Emergency Switch for Spas and Hot Tubs
E4203.2 Swimming Pools, Switching Devices
Switching devices shall be
located not less than 5 feet (1524 mm) horizontally from the
inside walls of pools, spas and hot tubs except where ...
2015 Michigan Residential Code > 42 Swimming Pools > E4203 Equipment Location and Clearances > E4203.2 Switching Devices
E4204.5 Swimming Pools, Bonding of Indoor Hot Tubs and Spas
The following
parts of indoor hot tubs and spas shall be bonded together:
All metal fittings within or attached to the hot tub or
spa ...
2015 Michigan Residential Code > 42 Swimming Pools > E4204 Bonding > E4204.5 Bonding of Indoor Hot Tubs and Spas
E4201.1 Swimming Pools, Scope
, wading pools, decorative
pools, fountains, hot tubs and spas, and hydromassage
bathtubs, whether permanently installed or storable, and shall
apply ...
Section R326 Building Planning, Swimming Pools, Spas and Hot Tubs
The design and construction of pools and spas shall comply with the International Swimming Pool and Spa Code ...