// CODE SNIPPET
1910.261(l)(2) Emergency Stops
JUMP TO FULL CODE CHAPTER
Electrically or manually operated quick power disconnecting devices, interlocked with braking action, shall be provided on all operating sides of the machine within easy reach of all employees. These devices shall be tested by making use of them when stopping the machine.
Related Code Sections
1910.261(k)(1) Special Industries, Emergency Stops
Paper machines shall be equipped with devices that will stop the machine quickly in an emergency. The devices shall consist of push buttons ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(k) Machine Room > 1910.261(k)(1) Emergency Stops
1910.68(c)(6) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Emergency Stop
An emergency stop means shall be provided. This ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.68 Manlifts > 1910.68(c) Mechanical Requirements > 1910.68(c)(6) Emergency Stop
1910.179(a)(59) Materials Handling and Storage, Emergency Stop Switch
An emergency stop switch is a manually or automatically operated electric switch to cut off electric power independently of the regular operating ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(a) Definitions Applicable to This Section > 1910.179(a)(59) Emergency Stop Switch
1910.263(h)(2) Special Industries, Emergency Stop Bar
An emergency stop bar shall be provided, and so located that the body of the operator will press against the bar if the operator slips and falls ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(h) Manually Fed Dough Brakes > 1910.263(h)(2) Emergency Stop Bar
1910.144(a)(1)(iii) General Environmental Controls, Stop
Emergency stop bars on hazardous machines such as rubber mills, wire blocks, flat work ironers, etc., shall be red. Stop buttons or electrical ...
OSHA 1910 General Industry > J General Environmental Controls > 1910.144 Safety Color Code for Marking Physical Hazards > 1910.144(a) Color Identification > 1910.144(a)(1) Red > 1910.144(a)(1)(iii) Stop