// CODE SNIPPET
13.4.3.1 Emergency Starting and Stopping
Go To Full Code Chapter
13.4.3.1.1
The sequence for emergency manual operation,
arranged in a step-by-step manner, shall be posted on the fire
pump engine. [20:11.6.6.1]
13.4.3.1.2
It shall be the engine manufacturer's responsibility
to list any specific instructions pertaining to the operation of
this equipment during the emergency operation. [20:11.6.6.2]
Related Code Sections
13.4.3.1 Fire Protection Systems, Emergency Starting and Stopping
The sequence for emergency manual operation,
arranged in a step-by-step manner, shall be posted on the fire
pump engine. [20:11.6.6.1 ...
13.4.4.6 Fire Protection Systems, Emergency Starting and Stopping
The sequence for emergency manual operation, arranged in a step-by-step manner, shall be posted on the fire pump engine. [20:11.6.6.1 ...
6.1.6.2.1 Escalators and Moving Walks,
) unless all starting switch(es) were first in the "RUN" position. (c) The starting switch(es) shall be located within reach of an emergency stop button ...
(A) Equipment for General Use, Starting and Stopping
Each controller shall be capable of starting and stopping the motor it controls and shall be capable of interrupting the locked-rotor current ...
(A) Equipment for General Use, Starting and Stopping
Each controller shall be capable of starting and stopping the motor it controls and shall be capable of interrupting the locked-rotor current ...