// CODE SNIPPET
[F] 414.5.2 Emergency or Standby Power
JUMP TO FULL CODE CHAPTER
Where required by the International Fire Code or this code, mechanical ventilation, treatment systems, temperature control, alarm, detection or other electrically operated systems shall be provided with emergency or standby power in accordance with Section 2702. For storage and use areas for highly toxic or toxic materials, see Sections 6004.2.2.8 and 6004.3.4.2 of the International Fire Code.
Emergency or standby power is not required for the mechanical ventilation systems provided for any of the following:
Related Code Sections
414.5.2 Special Detailed Requirements Based on Occupancy and Use, Emergency or Standby Power
or other electrically operated systems shall be provided with emergency or standby power in accordance with Section 2702. For storage and use areas ...
Building Code 2018 of Illinois > 4 Special Detailed Requirements Based on Occupancy and Use > 414 Hazardous Materials > 414.5 Inside Storage, Dispensing and Use > 414.5.2 Emergency or Standby Power
916.5 Fire Protection and Life Safety Systems, Emergency and Standby Power
Standby or emergency power shall be provided or the gas detection system shall initiate a trouble signal at an approved location if the power ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 916 Gas Detection Systems > 916.5 Emergency and Standby Power
Section 2702 Electrical, Emergency and Standby Power Systems
Emergency power systems and standby power systems shall comply with Sections 2702.1.1 through 2702.1.8 ...
620.91 Special Equipment, Emergency and Standby Power Systems
An elevator(s) shall be permitted to be powered by an emergency or standby power system. Informational Note: See ASME A17.1-2013/CSA B44-13, Safety ...
National Electrical Code 2017 of Illinois > 6 Special Equipment > 620 Elevators, Dumbwaiters, Escalators, Moving Walks, Platform Lifts, and Stairway Chairlifts > 620.91 Emergency and Standby Power Systems
2702.1.6 Electrical, Uninterruptable Power Source
An uninterrupted source of power shall be provided for equipment where required by the manufacturer's instructions, the listing, this code ...
Building Code 2018 of Illinois > 27 Electrical > 2702 Emergency and Standby Power Systems > 2702.1 General > 2702.1.6 Uninterruptable Power Source