// CODE SNIPPET
C405.8.1 Elevator Equipment and Cabs
JUMP TO FULL CODE CHAPTER
For the luminaires in each elevator cab, not including signals and displays, the sum of the lumens divided by the sum of the watts shall be not less than 35 lumens per watt. Ventilation fans in elevators that do not have their own air-conditioning system shall not consume more than 0.33 watts/cfm at the maximum rated speed of the fan. Controls shall be provided that will de-energize ventilation fans and lighting systems when the elevator is stopped, unoccupied and with its doors closed for over 15 minutes.
Related Code Sections
2702.2.17 Electrical, Elevators
forth in Section 3003.1. Controls, elevator cab light, ventilation and associated equipment required for elevator operation shall be connected ...
NYC Building Code 2014 > 27 Electrical > 2702 Emergency and Standby Power Systems > 2702.2 Where Required > 2702.2.17 Elevators
3001.11 Elevators and Conveying Systems, Special Provisions for Prior Code Buildings
Elevator cabs installed in existing shafts shall be permitted to be smaller than that required by this chapter where necessary ...
NYC Building Code 2014 > 30 Elevators and Conveying Systems > 3001 General > 3001.11 Special Provisions for Prior Code Buildings
Article 14 Elevators [PDF] (page 2)
prevents any operation of the elevator that moves the car away from the landing. (220.127.116.11). §C26-784.0 Car Enclosure or Cab.-The term “car enclosure ...
412.3 Special Detailed Requirements Based on Use and Occupancy, Airport Traffic Control Towers
occupied only for the following uses: Airport traffic control cab. Electrical and mechanical equipment rooms. Airport terminal radar ...
NYC Building Code 2014 > 4 Special Detailed Requirements Based on Use and Occupancy > 412 Aircraft-Related Occupancies > 412.3 Airport Traffic Control Towers
Section G501 Flood-Resistant Construction, Modifications
floodproofed space, the elevator shall be equipped with controls that will prevent the cab from descending into floodwaters. Permanent, durable ...