// CODE SNIPPET
1910.254(d)(7) Electrode Holders
JUMP TO FULL CODE CHAPTER
Electrode holders when not in use shall be so placed that they cannot make electrical contact with persons, conducting objects, fuel or compressed gas tanks.
Related Code Sections
1910.254(d)(7) Welding, Cutting, and Brazing, Electrode Holders
Electrode holders when not in use shall be so placed that they cannot make electrical contact with persons, conducting objects, fuel or compressed ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.254 Arc Welding and Cutting > 1910.254(d) Operation and Maintenance > 1910.254(d)(7) Electrode Holders
1910.422(g)(3) Commercial Diving Operations,
Welding and burning cables, electrode holders, and connections shall be capable of carrying the maximum current required by the work, and shall ...
OSHA 1910 General Industry > T Commercial Diving Operations > 1910.422 Procedures During Dive > 1910.422(g) Welding and Burning > 1910.422(g)(3)
1910.252(b)(4)(v) Welding, Cutting, and Brazing, Electrode Removal
When arc welding is to be suspended for any substantial period of time, such as during lunch or overnight, all electrodes shall be removed from ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(b) Protection of Personnel > 1910.252(b)(4) Work in Confined Spaces > 1910.252(b)(4)(v) Electrode Removal
1910.252(a)(4)(i) Welding, Cutting, and Brazing, Accidental Contact
When arc welding is to be suspended for any substantial period of time, such as during lunch or overnight, all electrodes shall be removed from ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(a) Fire Prevention and Protection > 1910.252(a)(4) Confined Spaces > 1910.252(a)(4)(i) Accidental Contact
1910.254(c) Welding, Cutting, and Brazing, Installation of Arc Welding Equipment -
distribution of machines among the phases of the supply circuit. In such cases no load voltages between electrode holders will be 2 times normal in d.c. or 1 ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.254 Arc Welding and Cutting > 1910.254(c) Installation of Arc Welding Equipment -