// CODE SNIPPET
3307.3.3.1 Electrical Storms
JUMP TO FULL CODE CHAPTER
During an electrical storm, the handling and use of explosives, including loading, shall cease and the following procedures shall be observed:
- All unused explosives at the blast site shall be immediately returned to their proper magazines.
- Electrical blasting cap leg wires and lead lines shall be shunted.
- The danger zone shall be cleared of all persons until the storm has passed.
Related Code Sections
*§28-112.10.2 Administration, Storm Related Damage to Electrical and Plumbing Systems
and electrical systems damaged by such storm. Applicants must submit certification by a licensed master electrician or a licensed master plumber or fire ...
NYC General Admin. Provisions 2008 > 1 Administration > 112 Fees > *§28-112.10 Waiver of Application, Permit and Inspection Fees for Certain Work Arising Out of the Storm That Occurred on October 29 and 30, 2012 > *§28-112.10.2 Storm Related Damage to Electrical and Plumbing Systems
§28-112.10.2 Administration, Storm Related Damage to Electrical and Plumbing Systems
and electrical systems damaged by such storm. Applicants must submit certification by a licensed master electrician or a licensed master plumber or fire ...
NYC General Admin. Provisions 2014 > 1 Administration > 112 Fees > §28-112.10 Waiver of Application, Permit and Inspection Fees for Certain Work Arising Out of the Storm That Occurred on October 29 and 30, 2012 > §28-112.10.2 Storm Related Damage to Electrical and Plumbing Systems
1113.1.3 Storm Drainage, Electrical
Electrical service outlets, when required, shall meet the requirements of the New York City Electrical Code ...
NYC Plumbing Code 2014 > 11 Storm Drainage > 1113 Sumps and Pumping Systems > 1113.1 Pumping System > 1113.1.3 Electrical
1113.1.3 Storm Drainage, Electrical
Electrical service outlets, when required, shall meet the requirements of the New York city electrical code ...
NYC Plumbing Code 2008 > 11 Storm Drainage > 1113 Sumps and Pumping Systems > 1113.1 Pumping System > 1113.1.3 Electrical