// CODE SNIPPET
1926.800(s) Electrical Safety
Go To Full Code Chapter
This paragraph applies in addition to the general requirements for electrical safety which are found in subpart K of this part.
1926.800(s)(1)
Electric power lines shall be insulated or located away from water lines, telephone lines, air lines, or other conductive materials so that a damaged circuit will not energize the other systems.
1926.800(s)(2)
Lighting circuits shall be located so that movement of personnel or equipment will not damage the circuits or disrupt service.
1926.800(s)(3)
Oil-filled transformers shall not be used underground unless they are located in a fire-resistant enclosure suitably vented to the outside and surrounded by a dike to retain the contents of the transformers in the event of rupture.
Upcodes Diagrams
Related Code Sections
1926.800(s) Underground Construction, Caissons, Cofferdams and Compressed Air, Electrical Safety
This paragraph applies in addition to the general requirements for electrical safety which are found in subpart K of this part ...
1926.950(a)(1)(ii) Electric Power Transmission and Distribution,
Notwithstanding paragraph (a)(1)(i) of this section, this subpart does not apply to electrical safety-related work practices for unqualified ...
1926.400 Electrical, Introduction
This subpart addresses electrical safety requirements that are necessary for the practical safeguarding of employees involved in construction work ...
1926.966(b) Electric Power Transmission and Distribution, Access and Working Space
and maintenance of such equipment by employees.
Note to paragraph (b): American National Standard National Electrical Safety Code, ANSI/IEEE C2-2012 contains ...
1926.966(f) Electric Power Transmission and Distribution, Guarding of Energized Parts
to paragraph (f)(1): American National Standard National Electrical Safety Code, ANSI/IEEE C2-2002 contains guidelines for the dimensions of clearance ...