// CODE SNIPPET
1910.252(d)(1)(iii) Electric Shock
JUMP TO FULL CODE CHAPTER
When arc welding is performed in wet conditions, or under conditions of high humidity, special protection against electric shock shall be supplied.
Related Code Sections
1910.252(d)(1)(iii) Welding, Cutting, and Brazing, Electric Shock
When arc welding is performed in wet conditions, or under conditions of high humidity, special protection against electric shock shall be supplied ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(d) Industrial Applications > 1910.252(d)(1) Transmission Pipeline > 1910.252(d)(1)(iii) Electric Shock
1910.254(d)(8) Welding, Cutting, and Brazing, Electric Shock
Cables with splices within 10 feet (3 m) of the holder shall not be used. The welder should not coil or loop welding electrode cable around parts ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.254 Arc Welding and Cutting > 1910.254(d) Operation and Maintenance > 1910.254(d)(8) Electric Shock
1910.332(a) Electrical, Scope
The training requirements contained in this section apply to employees who face a risk of electric shock that is not reduced to a safe level ...
1910.268(q)(1)(ii)(D) Special Industries,
Electric shock will occur when an employee, by either direct or indirect contact with an energized conductor, energized tree limb, tool, equipment ...
OSHA 1910 General Industry > R Special Industries > 1910.268 Telecommunications > 1910.268(q) Tree Trimming—Electrical Hazards > 1910.268(q)(1) General > 1910.268(q)(1)(ii) > 1910.268(q)(1)(ii)(D)
1910.179(g)(1)(v) Materials Handling and Storage,
Pendant control boxes shall be constructed to prevent electrical shock and shall be clearly marked for identification of functions ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(g) Electric Equipment— > 1910.179(g)(1) General > 1910.179(g)(1)(v)