// CODE SNIPPET
1926.302(a) Electric Power-Operated Tools
JUMP TO FULL CODE CHAPTER
Electric power operated tools shall either be of the approved double-insulated type or grounded in accordance with Subpart K of this part.
The use of electric cords for hoisting or lowering tools shall not be permitted.
Related Code Sections
1926.302(a) Tools - Hand and Power, Electric Power-Operated Tools
Electric power operated tools shall either be of the approved double-insulated type or grounded in accordance with Subpart K of this part ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.302 Power-Operated Hand Tools > 1926.302(a) Electric Power-Operated Tools
1926.956(d) Electric Power Transmission and Distribution, Hydraulic and Pneumatic Tools
Safe operating pressures for hydraulic and pneumatic tools, hoses, valves, pipes ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.956 Hand and Portable Power Equipment > 1926.956(d) Hydraulic and Pneumatic Tools
1926.303(a) Tools - Hand and Power, Power
All grinding machines shall be supplied with sufficient power to maintain the spindle speed at safe levels under all conditions of normal operation ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.303 Abrasive Wheels and Tools > 1926.303(a) Power
1926.304 Tools - Hand and Power, Woodworking Tools
All fixed power driven woodworking tools shall be provided with a disconnect switch that can either be locked or tagged in the off position ...
1926.957(a) Electric Power Transmission and Distribution, Design of Tools
Live-line tool rods, tubes, and poles shall be designed and constructed to withstand the following minimum tests ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.957 Live-Line Tools > 1926.957(a) Design of Tools