// CODE SNIPPET
803.2.5 Elbow Reduction
JUMP TO FULL CODE CHAPTER
For each elbow up to and including 45 degrees (0.79 rad) in the common vent, the maximum common vent capacity listed in the venting tables shall be reduced by 5 percent. For each elbow exceeding 45 degrees (0.79 rad) up to and including 90 degrees (1.57 rad), the maximum common vent capacity listed in the venting tables shall be reduced by 10 percent. [NFPA 54:13.2.6]
Related Code Sections
510.2.5 Water Heaters, Elbow Reduction
For each elbow up to and including 45 degrees (0.79 rad) in the common vent, the maximum common vent capacity listed in the venting tables shall ...
2018 Uniform Plumbing Code of Nevada > 5 Water Heaters > 510.0 Sizing of Category I Venting Systems > 510.2 Multiple Appliance Vent Table 510.2(1) Through Table 510.2(9) > 510.2.5 Elbow Reduction
803.2.5 Chimneys and Vents, Elbow Reduction
For each elbow up to and including 45 degrees (0.79 rad) in the common vent, the maximum common vent capacity listed in the venting tables shall ...
2018 Uniform Mechanical Code of Nevada > 8 Chimneys and Vents > 803.0 Sizing of Category I Venting Systems > 803.2 Multiple Appliance Vent Table 803.2(1) Through Table 803.2(9) > 803.2.5 Elbow Reduction
1210.5.3 Fuel Gas Piping, Elbows
Factory-made welding elbows or transverse segments cut therefrom shall have an arc length measured along the crotch at least 1 inch (25.4 mm ...
2018 Uniform Plumbing Code of Nevada > 12 Fuel Gas Piping > 1210.0 Gas Piping Installation > 1210.5 Gas Pipe Turns > 1210.5.3 Elbows
1310.7.3 Fuel Gas Piping, Elbows
Factory-made welding elbows or transverse segments cut therefrom shall have an arc length measured along the crotch of at least 1 inch (25 mm ...
2018 Uniform Mechanical Code of Nevada > 13 Fuel Gas Piping > 1310.0 Gas Piping Installation > 1310.7 Gas Pipe Turns > 1310.7.3 Elbows
G2428.3.6 Fuel Gas, (504.3.6) Elbows in Vents
For each elbow up to and including 45 degrees (0.79 rad) in the common vent, the maximum common vent capacity listed in the venting tables shall ...
Residential Code 2012 of Nevada > 24 Fuel Gas > G2428 (504) Sizing of Category I Appliance Venting Systems > G2428.3 (504.3) Application of Multiple Appliance Vent Tables G2428.3(1) Through G2428.3(4) > G2428.3.6 (504.3.6) Elbows in Vents