// CODE SNIPPET
11B-307.3.1 Edges and Corners
Related Code Sections
11B-307.3.1 Accessibility to Public Buildings, Public Accommodations, Commercial Buildings and Public Housing, Edges and Corners
surface, the edges of such signs and objects shall be rounded or eased and the corners shall have a minimum radius of 1 / 8 inch (3.2 mm) ...
Los Angeles Building Code > 11B Accessibility to Public Buildings, Public Accommodations, Commercial Buildings and Public Housing > 11B-307 Protruding Objects > 11B-307.3 Post-Mounted Objects > 11B-307.3.1 Edges and Corners
1404.12.6 Exterior Walls, Mechanical Fastenings
sidewalk level shall, in addition to the mastic cement and shelf angles, be held in place by the use of fastenings at each vertical or horizontal edge ...
Los Angeles Building Code > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.12 Glass Veneer > 1404.12.6 Mechanical Fastenings
1405.12.6 Exterior Walls, Mechanical Fastenings
sidewalk level shall, in addition to the mastic cement and shelf angles, be held in place by the use of fastenings at each vertical or horizontal edge ...
Los Angeles Building Code > 14 Exterior Walls > 1405 Installation of Wall Coverings > 1405.12 Glass Veneer > 1405.12.6 Mechanical Fastenings
1609.6.4.4.1 Structural Design, Components and Cladding
within the zones in areas of discontinuity of width and/or length "a," "2a" or "4a" at: corners of roofs and walls; edge strips for ridges, rakes ...
Los Angeles Building Code > 16 Structural Design > 1609 Wind Loads > 1609.6 Alternate All-Heights Method > 1609.6.4 Design Procedure > 1609.6.4.4 Application of Wind Pressures > 1609.6.4.4.1 Components and Cladding
1609A.6.4.4.1 Structural Design, Components and Cladding
within the zones in areas of discontinuity of width and/or length "a," "2a" or "4a" at: corners of roofs and walls; edge strips for ridges, rakes ...
Los Angeles Building Code > 16A Structural Design > 1609A Wind Loads > 1609A.6 Alternate All-Heights Method > 1609A.6.4 Design Procedure > 1609A.6.4.4 Application of Wind Pressures > 1609A.6.4.4.1 Components and Cladding