// CODE SNIPPET
1309.8.4 During Installation
JUMP TO FULL CODE CHAPTER
During and after installation, openings in the piping system shall be kept sealed to maintain a nitrogen atmosphere within the piping to prevent debris or other contaminants from entering the system. [NFPA 99:22.214.171.124.5.6]
Related Code Sections
1309.8.4 Health Care Facilities and Medical Gas and Medical Vacuum Systems, During Installation
During and after installation, openings in the piping system shall be kept sealed to maintain a nitrogen atmosphere within the piping to prevent ...
2018 Uniform Plumbing Code of Nevada > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1309.0 Joints and Connections > 1309.8 Nitrogen Purge > 1309.8.4 During Installation
E 509.2 Sustainable Practices, Pressurizing During Installation
Ground source heat pump ground loop piping to be embedded in concrete shall be pressure tested prior to pouring concrete. During pouring, the pipe ...
2018 Uniform Mechanical Code of Nevada > E Sustainable Practices > E 509.0 Testing > E 509.2 Pressurizing During Installation
400.34 Equipment for General Use, Minimum Bending Radii
The minimum bending radii for portable cables during installation and handling in service shall be adequate to prevent damage to the cable ...
National Electrical Code 2017 of Nevada > 4 Equipment for General Use > 400 Flexible Cords and Flexible Cables > 400.34 Minimum Bending Radii
1510.2 Roof Assemblies and Rooftop Structures, Structural and Construction Loads
during installation of the system ...
Building Code 2012 of Nevada > 15 Roof Assemblies and Rooftop Structures > 1510 Reroofing > 1510.2 Structural and Construction Loads