// CODE SNIPPET
508.3.3.1 Duct Connection
Related Code Sections
508.3.3.1 Exhaust Systems, Duct Connection
The duct connecting the oven flue(s) to the hood canopy shall be connected with a continuous weld or have a duct-to-duct connection. [See Figure ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 508.0 Type I Hoods > 508.3 Construction of Type I Hoods > 508.3.3 Eyebrow-Type Hoods > 508.3.3.1 Duct Connection
510.5.3.2 Exhaust Systems, Welded Duct Connection
Duct-to-duct connection shall be as follows: Telescoping joint, as shown in Figure 510.5.3.2(1). Bell-type joint, as shown in Figure 510.5.3.2(2 ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 510.0 Exhaust Duct Systems > 510.5 Other Grease Ducts > 510.5.3 Installation > 510.5.3.2 Welded Duct Connection
905.3 Installation of Specific Appliances, Access Panels
The ducts connected to duct furnaces shall have removable access panels on both the upstream and downstream sides of the furnace. [NFPA 54:10.10.3] ...
2018 Uniform Mechanical Code of Nevada > 9 Installation of Specific Appliances > 905.0 Duct Furnaces > 905.3 Access Panels
717.6.3 Fire and Smoke Protection Features, Nonfire-Resistance-Rated Floor Assemblies
assemblies shall be protected by any of the following methods: A shaft enclosure in accordance with Section 713. The duct connects not more than two ...
Building Code 2018 of Nevada > 7 Fire and Smoke Protection Features > 717 Ducts and Air Transfer Openings > 717.6 Horizontal Assemblies > 717.6.3 Nonfire-Resistance-Rated Floor Assemblies