// CODE SNIPPET
1910.423(c)(3)(i) Dual-Lock
Related Code Sections
1910.423(c)(3)(i) Commercial Diving Operations, Dual-Lock
OSHA 1910 General Industry > T Commercial Diving Operations > 1910.423 Post-Dive Procedures > 1910.423(c) Recompression Capability > 1910.423(c)(3) The Decompression Chamber Shall Be: > 1910.423(c)(3)(i) Dual-Lock
1910.107(m) Hazardous Materials, Organic Peroxides and Dual Component Coatings
All spraying operations involving the use of organic peroxides and other dual component coatings shall be conducted in approved sprinklered spray ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.107 Spray Finishing Using Flammable and Combustible Materials > 1910.107(m) Organic Peroxides and Dual Component Coatings
1910.262(b)(2) Special Industries, Belt Shifter Lock
A belt shifter lock is a device for positively locking the belt shifter in position while the machine is stopped and the belt is idling on the loose ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(b) Definitions Applicable to This Section > 1910.262(b)(2) Belt Shifter Lock
1910.303(f)(4) Electrical, Capable of Accepting a Lock
Disconnecting means required by this subpart shall be capable of being locked in the open position ...
OSHA 1910 General Industry > S Electrical > 1910.303 General > 1910.303(f) Disconnecting Means and Circuits > 1910.303(f)(4) Capable of Accepting a Lock
1910.333(b)(2)(iii) Electrical, Application of Locks and Tags
A lock and a tag shall be placed on each disconnecting means used to deenergize circuits and equipment on which work is to be performed, except ...
OSHA 1910 General Industry > S Electrical > 1910.333 Selection and Use of Work Practices > 1910.333(b) Working on or Near Exposed Deenergized Parts > 1910.333(b)(2) Lockout and Tagging > 1910.333(b)(2)(iii) Application of Locks and Tags