// CODE SNIPPET
614.3.1 Drop Pipe
JUMP TO FULL CODE CHAPTER
The drop pipe from the submersible pump to the first fitting past the well seal shall be either galvanized steel, stainless steel or PVC Schedule 80 threaded/coupled or lock joint pipe. The drop pipe for a single pipe, deep well jet pump shall be either galvanized steel or stainless steel. The drop pipe for a double pipe, deep well jet pump shall be either galvanized steel on the suction side and/or minimum PVC Schedule 40 on the pressure side.
Related Code Sections
614.3.1 Water Supply and Distribution, Drop Pipe
The drop pipe from the submersible pump to the first fitting past the well seal shall be either galvanized steel, stainless steel or PVC Schedule 80 ...
2017 FBC - Plumbing, 6th edition > 6 Water Supply and Distribution > 614 Well Pumps and Tanks Used for Private Potable Water Systems > 614.3 Piping > 614.3.1 Drop Pipe
614.3.1 Water Supply and Distribution, Drop Pipe
The drop pipe from the submersible pump to the first fitting past the well seal shall be either galvanized steel, stainless steel or PVC Schedule 80 ...
2020 FBC - Plumbing, 7th edition > 6 Water Supply and Distribution > 614 Well Pumps and Tanks Usedfor Private Potable Water Systems > 614.3 Piping > 614.3.1 Drop Pipe
608.17.4 Water Supply and Distribution, Water-Tight Casings
not less than 6 inches (152 mm) above the well platform. Casings shall be large enough to permit installation of a separate drop pipe. Casings shall ...
2014 FBC - Plumbing, 5th edition > 6 Water Supply and Distribution > 608 Protection of Potable Water Supply > 608.17 Protection of Individual Water Supplies > 608.17.4 Water-Tight Casings
608.17.4 Water Supply and Distribution, Water-Tight Casings
not less than 6 inches (152 mm) above the well platform. Casings shall be large enough to permit installation of a separate drop pipe. Casings shall ...
2017 FBC - Plumbing, 6th edition > 6 Water Supply and Distribution > 608 Protection of Potable Water Supply > 608.17 Protection of Individual Water Supplies > 608.17.4 Water-Tight Casings
608.18.4 Water Supply and Distribution, Water-Tight Casings
not less than 6 inches (152 mm) above the well platform. Casings shall be large enough to permit installation of a separate drop pipe. Casings shall ...
2020 FBC - Plumbing, 7th edition > 6 Water Supply and Distribution > 608 Protection of Potable Water Supply > 608.18 Protection of Individual Water Supplies > 608.18.4 Water-Tight Casings